8-0-12 Palm Liquid

$104.00

50% SLOW RELEASE WITH HUMATES AND MINOR ELEMENTS

GUARANTEED ANALYSIS

Total Nitrogen (N) 8.0%
4% Slowly Available Methylene Urea Nitrogen
4% Urea Nitrogen

Water soluble Potash(K204) 12.0%

SECONDARY ELEMENTS:

Iron (Fe)0.50%
Zinc (Zn)0.07%
Boron (B)0.02%
Manganese (Mn)0.50%
(Water Soluble Mn)
Magnesium (Mg)1.50%
Humates at 1% per total weight

Nutrients derived from: Methylene urea, Urea, Potassium Carbonate, FeEdta, Manganese Edta, Zinc Edta, Magnesium Sulphate, Boric Acid.

KEEP FROM FREEZING

A specialty fertilizer blended specifically for application on Palms and Southern Ornamentals in the practices of professional arboriculture.A true concentrated liquid for easy mixing & application. For root injection, soil drench, or foliar spray application. This solution has a low salt index and is compatible with fungicides & pesticides.

MIXING RATES:

1.25 gallons (1/2 jug) 100 gallons
2.5 gallons (1 jug) 200 gallons
5 gallons (2 jugs) 400 gallons

APPLICATION RATES:

Palms: the occurrence of root systems on palms is site and specie variable. Determine where the root ball is and how far it extends in the soil. Soil inject or drench this area to saturation.

Ornamental landscape trees and shrubs: 90% of the fine feeder roots are in the top two feet of soil, with most of those in the top eight inches. Start your application approximately 2 to 4 feet from the root flare and extend to beyond dripline.

The soil should be inoculated with a root probe going to 4 to 6 inches deep from a power rig set at approx. 150 to 200 psi, depending upon the porosity or density of the soil. The root area of the tree should be injected in a grid or in concentric circles spacing 3 feet apart. Inject approximately ½ gallon of solution per injection site. Based on the 3 feet spacing this should put around 150 gallons. Site and soil conditions vary, so adjust your application accordingly. Shake before using.

Additional information

Weight 30 lbs
Dimensions 6 × 8 × 12 in